[GC] Resident Evil Zero

montcer9012 · 03-24-2013, 06:12 AM **#11**

Someone can help me to configure this game?

I can't figure out the proper config to get full speed. It run too slow.

**Starscream** · 03-24-2013, 06:19 AM **#12**

Right click on the game in the game list and go to properties, then check off "Accurate VBeam Emulation". Your CPU is slow, so if that doesn't do it for you, you'll have to run the game at whatever speed you get.

montcer9012 · 03-24-2013, 07:33 AM **#13**

Well it make me gain a little bit speed (Before i was between 50~60 FPS, now is 60~70 FPS) so thanks! I try toggling off more options but it make me lost the speed gained.

I see you have overclocked your A6, where do you learn how to do it? I have lock my CPU to maximum speed with AMD Catalyst which will be 1.8GHz but i don't know why Dolphin does not make the CPU get the auto boost it have, which is 2.5GHz (When running Dolphin, none of the cores goes up from 1.8GHz). I have try make the CPU always run on 2.5GHz on K10STAT copying the values of B0 to P0 but if i do it the CPU take all the states of K10 and goes to P6 which is 800MHz...
Can you gave me any advice on k10STAT? Mine looks like this:

**Starscream** · (This post was last modified: 03-24-2013, 08:03 AM by Starscream.)

**Overclocking your laptop can be dangerous if you don't know what you're doing. I take no responsibility should anything go wrong.**

Raise the P0 to 2.0GHz or 2.2GHz (press apply when done) and see what happens. Download "Core Temp" and make sure it doesn't get too hot.

montcer9012 · 03-24-2013, 10:31 AM **#15**

But how do i raise it? It can be raised increasing FID field, or turning down the DID field. What about the CPU voltage? And the Up and Down percent field?

Yeah, i don't know how to overclock and haven't found a proper guide on the web.

**Starscream** · 03-24-2013, 10:37 AM **#16**

This really isn't the thread for in-depth overclocking discussions. Why don't you read this and if you need further help, you can ask for it there.

montcer9012 · (This post was last modified: 03-24-2013, 06:30 PM by montcer9012.)

Thanks for the help pal. I have follow the steps on that post and even OC to 2350 and 3000 MHz the game does not gain a speed boost. Is weird; it make me think there's a problem somewhere...

Either way, the sound have an annoying noise making the game look slower than it really is. If you want, watch this short gameplay i record on 2350MHz OC:
http://www.youtube.com/watch?v=vooX-54o3So

montcer9012 · 03-25-2013, 05:28 AM **#18**

The weird part is that you own an A6 which is slower and only have two cores. A dedicated GPU like the HD 6650 you have is the secret?

03-29-2013, 08:50 PM **#19**

Hello,
I'm having also a RE 0 Problem.
Please find it in the screenshot attached.

Don't know how to describe it, thats why I've added the screenshot.
When I'm moving, that black cut of part is changing and part of the environment gets visible.

I've played through the RE1 remake without any problem.
Now I've spent nearly 2 hours experimenting with the doplhin settings, but without any success Sad

But now matter what settings i change that cut off black part is always present.
Can anyone give me a hint ?

**LordVador** · 03-29-2013, 11:27 PM **#20**

Have you tried with another revision (a recent build or Dolphin 3.5)?

I see you're using 3.5-269: Features of this build were reverted in the right next one (3.5-270). So there might be some bugs in this build. And the issue you got in this game might be an example of these bugs