GBA <-> GCN Connection Guide

[hellangel]

(08-14-2010, 12:14 AM)badman Wrote: I'm Posting Back The Method I'm Using Again....

Open Dolphin and change all the GameCube Controller Ports from Standard Controller to GBA.
Make sure audio plugin is set to HLE.
Run Zelda four Swords on Dolphin.
Open VBA go to options>emulator>bios files and select the 'GBA BIOS.bin' file for 'GBA' and make sure enable is 'TICK'
Set your controls in VBA.
Now go to Link>jobus options
Make sure its enable and in the space below enter '127.0.0.1' or 'localhost' then click 'OK'
The game should 'FREEZE' so at this point on VBA click file, open GBA and load the 'GBA BIOS.bin' bios file.
And thats it your done and just do the same for wen playing multiplayer.

If it doesnt work be sure to install the c++ redis(2005, 2008) and dxwebsetup files.

I have the same problem as his. When E shows up, VBA-M freezes.

[badman]

It works great on Dolphin-x64-r6075 if thats wat u using.
And dunno if it cud be yuh bios file so try using mine and see if it works.
[link removed]

[hellangel]

(08-15-2010, 07:57 AM)badman Wrote: It works great on Dolphin-x64-r6075 if thats wat u using.
And dunno if it cud be yuh bios file so try using mine and see if it works.
[link removed]

It worked now, cause I changed Dolphin to r6075, but VBA-M crashes 7 seconds after loading the BIOS.

[hellangel]

It wasn't your BIOS, it was Dolphin

[Jack Frost]

You know the BIOS is copyrighted material that mustn't be distributed like that?

[Joshua21136]

Jack Frost, would you know how to convert wad files to sd card files that the wii can read without the homebrew channel? If so please let me know.

[hellangel]

(08-15-2010, 08:47 PM)Joshua21136 Wrote: Jack Frost, would you know how to convert wad files to sd card files that the wii can read without the homebrew channel? If so please let me know.

This isn't the Topic to ask for this.

[Brian10122]

For some reason, on Pokemon BOX it just hangs on "Confirming Connection. Please wait."

[hellangel]

Up!!!!!!!

[Zarigis]

I've got it working flawlessly with four swords, but having zero luck with crystal chronicles. Near as I can tell no data is getting sent, 0x02000000 WRAM is all zeroes all the time and the nintendo logo is just a garbled mess. This is with revision 947 (VBA-M) and revision 6117 (Dolphin). Am I out of luck until there's an update?