Gamecube input blank?

10-02-2014, 10:05 AM #1

Hi,

I am using Dolphin 4.0 and a Mayflash GC to USB converter. It worked fine until one day, I go into the GC controller configuration screen, and any time that I select an input, it doesn't "stick" and the controller selection goes blank, disallowing me from using my controllers. I reinstalled drivers and tried other versions of Dolphin. The controllers actually do work on my mac, so I don't know what the issue is! Any help is appreciated!

**DJBarry004** · 10-02-2014, 10:33 AM #2

When you mentioned "tried other versions of Dolphin", does that inclued latest dev build? If not, try it and tell what happens.

10-02-2014, 10:34 AM #3

I have tried the latest dev build!

I've searched the forums quite extensively too :/

10-03-2014, 12:40 AM #4

Bum, anyone have suggestions?

**ulao** · (This post was last modified: 10-03-2014, 02:48 AM by ulao.)

Quote:The controllers actually do work on my mac

Does this mean the issue is with a windows system, or you are using a mac and the controller works just not in dolphin.

If the former, Did you test the controller in the OS (control panel)?

10-03-2014, 04:25 AM #6

I have an iMac with Mac OS and bootcamped Windows 7. The controllers work on the Mac partition. So what I am getting at is that it is not a hardware issue. Any ideas?

**ulao** · 10-04-2014, 02:26 AM #7

So step one is "Did you test the controller in the OS (control panel)? " this will tell you if its a Dolphin issue or OS issue. If it does not work in the control panel then look for help with mayflash. If they can't help you, next time don't by a usb controller with drivers as they are just a pain to deal with...