emulated wii mote is not 1 by 1 place of cursor

[megamanyoutuber]

so this thing happens in any game, so emulator wii mote cursor is 1 by 1 place of real cursor, so that happens, that i can't access some parts of the emulated screen, where you need to get into, up and down by using forward and backwards in swing, but i still can't get left and right parts of screen

[ExtremeDude2]

Post your controller configuration.

[megamanyoutuber]

Post your controller configuration.

i will post config the next day, i can't access pc at this time

[megamanyoutuber]

i will post config the next day, i can't access pc at this time

here it is
https://drive.google.com/file/d/14giBR3E...sp=sharing
and
https://drive.google.com/file/d/1wkkXyKL...sp=sharing

[ExtremeDude2]

Have you tried calibrating under point?

[megamanyoutuber]

Have you tried calibrating under point?

didn't helped

[Billiard26]

You'll need to increase the "Total Yaw" and "Total Pitch" settings under "Point" if regions are unreachable.
This needs to be done on a per-game basis.

[megamanyoutuber]

You'll need to increase the "Total Yaw" and "Total Pitch" settings under "Point" if regions are unreachable.
This needs to be done on a per-game basis.

I will try this, Thanks!

[megamanyoutuber]

You'll need to increase the "Total Yaw" and "Total Pitch" settings under "Point" if regions are unreachable.
This needs to be done on a per-game basis.

Now i can access these regions, Thank you so much!