Emulated Motion Plus [UNOFFICIAL]

[kotleta]

Hello!
Can anyone post link for latest and good mouse and keyb config for SS.

THX

[zathe922]

soo.... i gave up on trying to get the 360 controller to work, however i must have messed something up. You know the part after the emulator have "configured the m+"? the part where you are supposed to place the hand in the middle of the screen to proceed? well... there is no hand there anymore, so i cant even start the game now. I have no idea what i did to make this happen, i didnt really change anything as far as i can remember.

[Zee530]

Try unchecking the IR off box

[oOTAGOo]

Step by Step: Skyward Sword + xBox controller
I haven't seen a quick/easy walkthrough on how to get a gamepad set up for Dolphin and Skyward Sword so I thought I would post one for anyone in need.

1) Download:

x64: http://www.mediafire.com/?5j57dnnhmqzn2bm

x86: http://www.mediafire.com/?8303maf7ggfl20j

2) Unzip and drag everything into your Dolphin file. This should replace the Dolphin.exe and a few .dll files. This is basically an unofficial patch that lets dolphin emulate the Wii Motion Plus.

3) Download and install Microsoft Visual C++ 2010 if you do not already have it

x64: http://www.microsoft.com/download/en/det...x?id=13523

X86: http://www.microsoft.com/download/en/det...px?id=8328

4) Now that you have patched Dolphin, you can map buttons to your gamepad. If you are using an xbox controller You are in luck. Someone has posted a controller Profile that works perfectly with Skyward Sword! So download http://www.mediafire.com/?4zr3tdl8xc43qhy and place in

Dolphin>User>Config>Profiles>Wiimote (create the Wiimote file if not already there.) Make sure the extension is .ini and not .ini.txt sometimes windows will add .txt to the end of .ini files.

5) Now go to your Wii Remote setup, select Emulated Wiimote and click configure. Make sure your Controller is plugged in/turned on. Select your controller from the Device drop down. Now Select the Profile we just added (should be "Zelda SS (temp)4" if you didn't rename it")


You can transfer your save from your Wii over to Dolphin! (just make sure the copy of SS is from the same region as your save copy. For instance I had a copy of the EU version of SS on Dolphin, and my save game would not read because it came from a US version off my Wii.

[aulis2]

(04-12-2012, 10:45 PM)kotleta Wrote: Hello!
Can anyone post link for latest and good mouse and keyb config for SS.

THX

here is dolphin with all configurated for keyboard and mouse..

hold left click an move the mouse where you want to swing the sword

to flight the bird mode the mouse up and down to go up and down
and in the directional botons right and left to go left and right..
x is a boton

shake is y..

some question write me a message.. here is my dolphin:

http://www.mediafire.com/?e55o9jjz1iqn2xi

use freearc program to extract the file..paste it in the desktop.
here is freearc program:
http://freearc.org/Download.aspx
the only problem is in the part when you have to select the name in the begining...be patient..

[Zack_X]

Hi everybody,

LoZ Skyward Sword + PS3 Controller

I can sit here are a help, I try my PS3 controller set for Skyward Sword now that I've done everything I get him, but not with the emulator to run

Now I use the Dolphin-win-x86-v3.0-591
kekomme but always the message that I connect the accessories must

There have also been with
Dolphin_x86_2011-12-08_ 9-12 and 01-05_11-Dolphin_x86_2012-38
try here is the message but not because the PS3 controller is not recognized

Here the profile of what I created for my PS3 controller
http://www.mediafire.com/?mbk6a2fclbmex0n

I use it with MotioninJoy
in analog gamepad mode 1 (POV, joysticks)

[Adriori]

(04-13-2012, 04:21 AM)oOTAGOo Wrote: Step by Step: Skyward Sword + xBox controller
I haven't seen a quick/easy walkthrough on how to get a gamepad set up for Dolphin and Skyward Sword so I thought I would post one for anyone in need.

1) Download:

x64: http://www.mediafire.com/?5j57dnnhmqzn2bm

x86: http://www.mediafire.com/?8303maf7ggfl20j

2) Unzip and drag everything into your Dolphin file. This should replace the Dolphin.exe and a few .dll files. This is basically an unofficial patch that lets dolphin emulate the Wii Motion Plus.

3) Download and install Microsoft Visual C++ 2010 if you do not already have it

x64: http://www.microsoft.com/download/en/det...x?id=13523

X86: http://www.microsoft.com/download/en/det...px?id=8328

4) Now that you have patched Dolphin, you can map buttons to your gamepad. If you are using an xbox controller You are in luck. Someone has posted a controller Profile that works perfectly with Skyward Sword! So download http://www.mediafire.com/?4zr3tdl8xc43qhy and place in

Dolphin>User>Config>Profiles>Wiimote (create the Wiimote file if not already there.) Make sure the extension is .ini and not .ini.txt sometimes windows will add .txt to the end of .ini files.

5) Now go to your Wii Remote setup, select Emulated Wiimote and click configure. Make sure your Controller is plugged in/turned on. Select your controller from the Device drop down. Now Select the Profile we just added (should be "Zelda SS (temp)4" if you didn't rename it")


You can transfer your save from your Wii over to Dolphin! (just make sure the copy of SS is from the same region as your save copy. For instance I had a copy of the EU version of SS on Dolphin, and my save game would not read because it came from a US version off my Wii.

I did everything you said but I still get the message to connect the m+... I downloaded the profile you gave because I have a Xbox 360 controller. Is there something I can do?

[khaledantar666]

@ Adriori : Save your profile and apply it ingame, if it still ask you to connect m+, colse dolphin, open it and launch the game, it should be okay

[Link-GC]

Hello! I also have an Xbox 360 controller. I downloaded the .ini file and placed it in the directory Dolphin>User>Config>Profiles>Wiimote , but the program doesn't show any profile :S it's all in white... What's wrong?

[Kakkoii]

So, I tried searching, but I couldn't find a clear answer on this.. You'd think it would be one of the things explained at the start of the thread.

Can I use my normal wiimote with this? My bluetooth adapter came in today and I was excited about using my Wiimote instead of Xbox controller. I would have thought that this patch would also allow a regular Wiimote to be used, it just wouldn't be as accurate as motion+, since it would be emulating it..

Do I have to use GlovePie or something and map all my wiimote functions to the emulated wiimote instead?

(Also, I know how to use the Wiimote, it works in other games on Dolphin. It's just this one in particular.. )

Thanks.