Hi all,
I really hope some one out here can help me with getting my controllers to work within the games.
So pretty much everything seems to work as it should, however within the games itself the controllers are not responding to any buttons at all.
Setup:
Dolphin 5.0-15445
Windows 10
Hardware:
Mayflash Dolphin bar
2x Techken Wii controllers with motion plus (https://www.amazon.nl/gp/product/B08GLSFW1X/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&th=1)
What i've done so far:
- Sync Wii controllers with Dolphinbar. This all works like it should. Pressing sync on both the Dolphinbar and the controllers. Controllers sync up as they should. one has the first light on, and the second the second light.
- Dolphin bar is in mode 4. Button under the sync button is continously on.
- Launching Dolphin as administrator
- Both controllers vibrate when i launch Dolphin. They will not vibrate if i hit refresh in the controller settings
- Setup both controllers as Real Wii Remote (Wii Remote 1, Wii Remote 2)
- enable continous scanning (tried with both on and off)
- Tried completely removing Dolphin including settings and reinstall
- Removed the Mayflash USB and reinstalled it
- The controllers work when i set them to mode 1 on the Dolphinbar which emulates a mouse
- Tried with several Wii games
- Hit alt + F5 to disabled and re-enable the controller
Any suggestion are much apperciated!
I really hope some one out here can help me with getting my controllers to work within the games.
So pretty much everything seems to work as it should, however within the games itself the controllers are not responding to any buttons at all.
Setup:
Dolphin 5.0-15445
Windows 10
Hardware:
Mayflash Dolphin bar
2x Techken Wii controllers with motion plus (https://www.amazon.nl/gp/product/B08GLSFW1X/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&th=1)
What i've done so far:
- Sync Wii controllers with Dolphinbar. This all works like it should. Pressing sync on both the Dolphinbar and the controllers. Controllers sync up as they should. one has the first light on, and the second the second light.
- Dolphin bar is in mode 4. Button under the sync button is continously on.
- Launching Dolphin as administrator
- Both controllers vibrate when i launch Dolphin. They will not vibrate if i hit refresh in the controller settings
- Setup both controllers as Real Wii Remote (Wii Remote 1, Wii Remote 2)
- enable continous scanning (tried with both on and off)
- Tried completely removing Dolphin including settings and reinstall
- Removed the Mayflash USB and reinstalled it
- The controllers work when i set them to mode 1 on the Dolphinbar which emulates a mouse
- Tried with several Wii games
- Hit alt + F5 to disabled and re-enable the controller
Any suggestion are much apperciated!