(09-05-2010, 05:52 PM)guitarlifter Wrote: Should I go above the 1.425v that the OP said to not go over in order to do this, or is going above that too dangerous like the OP stated?
If you are hitting 65c running LinX then I wouldn't go any farther until you invest in better cooling. The TJMAX for those chips are around 75c, and 65c is just too close.
You don't want to run a chip above 60c at any time, even under load.
(09-05-2010, 07:26 AM)KHRZ Wrote: HWMonitor says my CPU cores are both 65c when I load them 100% with LinX, and they're not overclocked... this bad?
This is an earlier post, but someone said "no that's normal" in response to it.
This is absolutely NOT normal. 65c at stock settings is a bad temp. You do not want to overclock until you invest in better cooling.
Phenom II x6 1055t @ 4.4ghz | Asus Crosshair IV Formula motherboard | G.Skill Flare DDR3 1800 7-8-7-24 | Corsair TX850w PSU | Radeon 4870 @ 950/1200 | Logitech Z-5500 505 Watts | 42 inch Samsung LCD