Dolphin Sensor Bar setup guide?

[nekroturkey]

Having some trouble setting this sensor bar up, and I can't find any decent guides explaining the process. When I try to set it up myself, the sync button just keeps flashing and the Wiimote won't connect.

Edit: The sensor bar is detected by my PC in the device manager, and I've updated to the latest firmware and drivers. The Wiimote still won't sync up though.

Edit 2: In the Dolphin Wiimote configuration menu it says: "A supported bluetooth device could not be found. You must manually connect your wiimotes." Does that mean the bluetooth on the sensor bar isn't working?

Edit 3: I'm not using third-party accessories either. My Wiimote and nunchuk were purchased directly from Best Buy. It's the newer "Wii Motion Plus Inside" version.

[MayImilae]

You need to press the sync button on the dolphin bar then the sync button on the wiimote. It works just like syncing wiimotes to a wii. And the dolphinbar includes a little manual that tells you how to do this...

[nekroturkey]

(11-15-2014, 04:08 PM)MaJoR Wrote: You need to press the sync button on the dolphin bar then the sync button on the wiimote. It works just like syncing wiimotes to a wii. And the dolphinbar includes a little manual that tells you how to do this...

The manual says to hold down the sync button on the sensor bar and the 1/2 buttons on the Wiimote and that the flashing blue lights on both devices should become solid. Hitting the sync button on the Wiimote does nothing either, even when hitting it in tandem with the sync button on the sensor bar.

[MayImilae]

DolphinBar Instructions Wrote:-For the initial syncing, press the "SYNC" button on the DolphinBar itself and on the bottom of your controller, you'll find that the 4 blue LEDs on your controller and the LED0 on the DolphinBar will flash quickly. Once the syncing process is complete, the LED on the DolphinBar and your controller will stay lit.

That's what the manual says. What happens when you do that?