In the future, try not to hijack someone's thread. Either make your own thread about how well your hardware will perform with Dolphin in the Hardware Forum, or ask how your computer will run this game in it's official game thread
No matter which settings you use, you won't get fullspeed in this game. It's quite demanding and requires overclocking. Neither your current CPU or motherboard support overclocking either. You should get playable speeds, however, ~60-70%. You probably won't be able to set your IR very high with a GT 620 without slowing down. I don't know a lot about GPUs; you might expect around 2x IR, though I'm just guessing. As far as I know, there are no specific settings necessary for this game. Use the defaults if you're unsure.
It's supposed to make PAL games that run at 50 FPS run at 60 FPS without affecting the game's internal speed. Someone said it does that same thing with PAL games that run at 25 FPS (bumping them up to 30 FPS). If your game is not PAL (NTSC-U or NTSC-J), you do not need to use this option. Raising the FPS will affect how "smooth" animations appear to you, but as you've noticed, there are performance costs sometimes.
Again, this is rafael's thread, so if you have further questions, post in the links I provided above.
robertul Wrote:I would like to know which settings are useful for me on this new rig so that I can benefit the most from dolphin 3.5. It is a lenovo desktop board, model H520, in case you wanted to knew. I will play the game WWE '13.
No matter which settings you use, you won't get fullspeed in this game. It's quite demanding and requires overclocking. Neither your current CPU or motherboard support overclocking either. You should get playable speeds, however, ~60-70%. You probably won't be able to set your IR very high with a GT 620 without slowing down. I don't know a lot about GPUs; you might expect around 2x IR, though I'm just guessing. As far as I know, there are no specific settings necessary for this game. Use the defaults if you're unsure.
robertul Wrote:P. S. May you please, tell me what is the option EURGB60 (Pal60) mode about? It tends to slow down this game, as it forces it(correct me if I am wrong?) to run to 60 FPS. I am better off with the option turned off. But please tell me, if there is anything useful about this setting, because I consider it to be useless, so you might as well have plans to remove it. Just my opinion. Again, correct me if I am mistaken. I would also like to tell you that I have tested it and it runs pretty nicely; for 1-1 matches, sometimes it gets over full speed.
It's supposed to make PAL games that run at 50 FPS run at 60 FPS without affecting the game's internal speed. Someone said it does that same thing with PAL games that run at 25 FPS (bumping them up to 30 FPS). If your game is not PAL (NTSC-U or NTSC-J), you do not need to use this option. Raising the FPS will affect how "smooth" animations appear to you, but as you've noticed, there are performance costs sometimes.
Again, this is rafael's thread, so if you have further questions, post in the links I provided above.