(12-09-2012, 12:23 PM)rpglord Wrote: You dont need to change pci-e you should leave it at auto or 100 mhz, it shouldn't be increased as it can damage your graphic card.No, you don't understand, if I set it to 100 MHz and overclock my CPU, it will froze, simple as that, it will lock up my OS, but if I set it to Auto, I am afraid it will go much higher than 100 MHz and it will damage the graphics card.
You should change cpu host frequency, for your cpu you need to put it to 429 to get it to run at 3ghz, since your cpu has low multiplier, but it may be too much. Try 400 mhz for starters and see if that is stable.
Also make sure to change memory multiplier so it doesnt run at more then 800 mhz, or that can also cause instability
Okay, I will set CPU host frequency to 400 MHz and memory multiplier lock it up to 800 MHz, as this is the default frequency that my Memory (RAM) is operating. What about performance enhance, might change that from turbo to standard as standard is for stability when overclocking, right?