Compatible wii Hardware List

[ulao]

Ok results are in on the bar. The 12 volt conversion fixed all my problems. The cursor is not quite as smooth as the wii but center is center ( where I point ). I know that is a big gripe about the wii in general but I'm very pleased.

Ok how to convert. I just used a 12 volt switching ac to dc converter. I highly recommend a switching type do to the nature of the device, I think an over voltage would be bad. I see no reason a normal analog convert would work but I have a feel for these things. The wii-bar had a red and grey wire, making no assumptions I opened it up to be sure. They even labeled the board ( go figure ) so its clear red was +12 and grey was ground.

scummos. these IR's are in series. I forget ATM, but I think there were 5 per side where the wireless ( 4.5 volt ) has 3 per side. Dont feel like doing the math ATM ;P

NOTE: I found the distance is critical, I think the wii suggests 8 feet? Also the cursor does vanish at times and it takes a bit to get it back. I think the emulation of the pointer is still a bit faulty, most certainly in some game other then some others.

[admin89]

I pick some random bluetooth adapter today since i lost my BT adapter somewhere

1) Mini BT Dongle (class 2) : 3$
Dolphin: r5168 , 3.0 and latest dolphin
wiimote: Original Nintendo RVL-CNT-01
brand: No name
bought from : Flea market lol
Bluetooth ID: ????
OS: Windows 8
Working: only work with 1 wiimote (Toshiba BT Stack)
not working: with 2 wiimote
notes: Class 2 Mini BT suck
Status : Half-a**

2) 2 Old style BT adapter (Class 1) : 2 x 5$
Dolphin: r5168 , 3.0 and latest dolphin
wiimote: 4 Original Nintendo RVL-CNT-01
brand: No name
bought from : Flea market lol
Bluetooth ID: ????
OS: Windows 8
Working: with 4 wiimote fine (Toshiba BT Stack)
not working: Nope
notes: Class 1 FTW!
Status : Success

[Lethalgeek]

Just wanted throw out http://www.target.com/p/TARGUS-MICRO-BLUETOOTH-ADAPTER/-/A-13728117 this bluetooth adapter from Target seems to work just fine with my launch Wiimotes. Dolphin is able to find them immediately.

[Warrior of Hyrule]

Can anyone tell me if this list can be updated? Specifically for the RVL-003.

[ulao]

The community updates this list. community, including you. So if its not on the list it is for one of two reasons.

1) someone with X setup is not interested in commenting.
or
2) X setup is not common.

As soon as I get a post I update it. So its up to everyone here to chip in.

[Warrior of Hyrule]

Tanks. I understand.
But, can you say if the newest builds have... some regress in Wiimote Compatible?

[ulao]

I can not, nor have I see any change in behavior or notes for that matter..

[serioussam909]

I also have chinese RVL-003 + nunchuk.
My experience:
Works in GlovePie - but frequently stops working in Dolphin.
Dolphin 3.0 Rev 416
OS: Windows 8 Developer Preview x64
Bluetooth stack: Toshiba
It appears to be connected (as real wiimote) but game (I have tested only with Mortal Kombat Armageddon) does not respond to input.
In this game - everything works OK in main menu (IR pointer also) and Kreate a Fighter, but when I start Kombat or Motor Kombat - it stops responding, but remains connected.
Glovepie->ppjoy->emulated wiimote or gcpad - works without issues or disconnects (except motion sensors and IR)

But when it is working in Dolphin - it works OK - including IR.

[skid]

ulao, serioussam909 said his wiimote is a RVL-003. You have put a ? there.

You also didn't credit Admin89.

[ulao]

thx will make the changes

Remember everyone we do have a template


From:
Dolphin:
wiimote:
brand:
bought from :
Bluetooth :
Bluetooth ID:
brand:
bought from:
Sensor bar:
Bought from:
OS:
Working:
not working:
notes:
Resolution or reason for failure: