case modders HELP! PLEH! AIDEZ MOI! etc etc

**boogerlad** · (This post was last modified: 06-12-2009, 11:50 AM by boogerlad.)

woops. Sorry. In that case, you could get thermalright s128 or the new scythe stuff. like the SHURIKEN Rev.B

**DacoTaco** · 06-12-2009, 10:31 PM **#32**

(06-12-2009, 11:49 AM)boogerlad Wrote: woops. Sorry. In that case, you could get thermalright s128 or the new scythe stuff. like the SHURIKEN Rev.B

this?
http://alternate.be/html/product/details.html?articleId=74687&showTechData=true#tecData
the size looks ok but i fear the capacitors will be in the way a bit.
but ill look into it (cause its not a expensive fan)

ive been looking at this too

http://alternate.be/html/product/details.html?articleId=74552&showTechData=true#tecData

because its small at the bottom etc etc
the hight is just.. :/
it'll JUST touch my Blacklight >_>

**abfab126** · 06-12-2009, 11:37 PM **#33**

http://www.materiel.net/ctl/Radiateurs_processeurs/43627-Nitrogon_NT06_E.html

Maybe something like that ?

http://www.materiel.net/ctl/Radiateurs_processeurs/28281-CNPS7500_AlCu_Led.html

Very small and efficient (+ you have a fan controller like mine , like i describe earlier )

06-13-2009, 01:03 AM **#34**

Such little coolers for such strange cpu like P4 won't change much, maybe temperature will drop about 5 degrees if U'll be lucky and make this "balanced airflow" Wink

thing. If U want some real effect U need really good cooler, which means very expensive, or go for new cpu, or better go for new pc with some new AMD cpu, theese are much colder than Intels. I know cause I had Athlon 64, Athlon 64 X2 and now I'm writing this on Phenom. Tongue

**DacoTaco** · (This post was last modified: 06-13-2009, 01:42 AM by DacoTaco.)

(06-13-2009, 01:03 AM)Veeeight Wrote: Such little coolers for such strange cpu like P4 won't change much, maybe temperature will drop about 5 degrees if U'll be lucky and make this "balanced airflow" thing. If U want some real effect U need really good cooler, which means very expensive, or go for new cpu, or better go for new pc with some new AMD cpu, theese are much colder than Intels. I know cause I had Athlon 64, Athlon 64 X2 and now I'm writing this on Phenom.

i think ill just go and mod my case not caring about adding fans except for the side panel. as i was going to upgrade to C2D in the future

EDIT: btw, already started getting ready for painting. ill be look for a plexiglass soon so once i get that i can get everything started Smile

wish me luck!

EDIT: to make it easier for you guys:
http://twitter.com/DacoTaco

ill prob be easier to see my progress over the days

Glurion · 06-13-2009, 07:37 AM **#36**

I'm not 100% sure this would fit in your case, cause it is fairly big and it can sometimes obstruct things such as the RAM and the northbridge sinks, so its combination of case size and how your system board is set out.

but on the good side this keeps my cpu @40c (idle) and 50-55c (full load) and this was tested after a few hours of running, (my cpu has a 1GHz overclock).

My Fan Config

1x 120mm on front (blowing air in)
1x 80mm on side (blowing air out)
2x 80mm on back (blowing air out)

Well that's my setup and recommendation for you

**DacoTaco** · 06-13-2009, 06:55 PM **#37**

(06-13-2009, 07:37 AM)Glurion Wrote: I'm not 100% sure this would fit in your case, cause it is fairly big and it can sometimes obstruct things such as the RAM and the northbridge sinks, so its combination of case size and how your system board is set out.

but on the good side this keeps my cpu @40c (idle) and 50-55c (full load) and this was tested after a few hours of running, (my cpu has a 1GHz overclock).

My Fan Config

1x 120mm on front (blowing air in)
1x 80mm on side (blowing air out)
2x 80mm on back (blowing air out)

Well that's my setup and recommendation for you

its

Code:

[u]

not

anyway, ill prob wait for a cpu fan after the case mod cause they all seem to be big not not fitting cause of the ram or electric components on my mobo. and the hight is just *facepalm*
but ok, maybe ill just buy a new stock intel fan cause its a good one and didn't make such noise at start at all (its first 5 years was in a VERY dusty house with negative airflow so im guessing alot of dust IN the fan which i can't reach)

and i had an idea of adding a second 80mm fan in front but i wasn't sure to do it as in front, if i fuck up i have a nice hole i can't fix
in the side panel i can fix it by placing the plexiglass Tongue

**DacoTaco** · 06-18-2009, 04:00 AM **#38**

BUMP!

my fan guard/grill is in. ALL HAIL MY UNREAL GRILL!
[Image: unrealGrill.jpg]

altho the picture is black mine is silver. but i can paint it if i feel like it Tongue

CacoFFF · 06-18-2009, 02:55 PM **#39**

(06-18-2009, 04:00 AM)Daco Wrote: BUMP!

my fan guard/grill is in. ALL HAIL MY UNREAL GRILL!

altho the picture is black mine is silver. but i can paint it if i feel like it

Make it golden, or green (like unreal editor)
I wish i had one of those... UT is my favourite game.

**DacoTaco** · 06-27-2009, 02:31 AM **#40**

http://twitter.com/DacoTaco/status/2346068520

ill just leave that here