SHE WORKS! I have a few more little tiny bugs to get out for the Maximus Arcade, but she works!
I was able to overclock her to about 4.4 ghz.
![[Image: zfrQXBR.jpg]](http://i.imgur.com/zfrQXBR.jpg)
![[Image: ZPAMgG2.jpg]](http://imgur.com/ZPAMgG2.jpg)
![[Image: 7lmiBdi.jpg]](http://imgur.com/7lmiBdi.jpg)
![[Image: RP3heDl.jpg]](http://imgur.com/RP3heDl.jpg)
![[Image: Ppj39O8.jpg]](http://imgur.com/Ppj39O8.jpg)
![[Image: 3hLBuo5.jpg]](http://imgur.com/3hLBuo5.jpg)
Couple of notes for anyone attempting to replicate this system.
#1. Noctua NH-L12 120mm & 92mm SSO Bearing PWM Fans CPU Cooler - WON'T FIT on this MB: ASUS DDR3 Intel Z77 2400 Socket Motherboard P8Z77-I DELUXE/WD
http://www.newegg.com/Product/Product.as...6835608025
The Fan is too big and hits the memory slots. It fits height wise, but not width.![Sad Sad](https://forums.dolphin-emu.org/images/smilies/sad.gif)
#2. Do not use a USB DVD Drive to install windows. You can see from one of my overhead pictures I had to put a SATA drive on there to install windows. What happens with the USB drive is that it doesn't properly detect the AHCI ports on the MB even when you manually select the driver to install on launch. It took me a while to figure that out since that kind of glitch doesn't make much sense. Then again, I don't suspect many people think about only using a USB Disk drive. I didn't use sata originally because I didn't plan on keeping the drive on there permanently.
#3. There is a power switch on the power supply that is hidden in the chasis and on shipping the default is OFF. The switch isn't on the outside of the case, which kind of sucks, but what can you do. I had a small "eep" moment when I plugged it in and nothing happened. The switch is even slightly hidden by the power cable that gets routed around.
#4. No IR on this MB. I ordered a simple IR receiver to put it into my harmony system. The USB ports can stay on when the computer is off, so the IR receiver should allow the system to be turned on via remote.
That's all the notes I have for now. I will have a few more via video when I demo the system.
I was able to overclock her to about 4.4 ghz.
![[Image: zfrQXBR.jpg]](http://i.imgur.com/zfrQXBR.jpg)
![[Image: ZPAMgG2.jpg]](http://imgur.com/ZPAMgG2.jpg)
![[Image: 7lmiBdi.jpg]](http://imgur.com/7lmiBdi.jpg)
![[Image: RP3heDl.jpg]](http://imgur.com/RP3heDl.jpg)
![[Image: Ppj39O8.jpg]](http://imgur.com/Ppj39O8.jpg)
![[Image: 3hLBuo5.jpg]](http://imgur.com/3hLBuo5.jpg)
Couple of notes for anyone attempting to replicate this system.
#1. Noctua NH-L12 120mm & 92mm SSO Bearing PWM Fans CPU Cooler - WON'T FIT on this MB: ASUS DDR3 Intel Z77 2400 Socket Motherboard P8Z77-I DELUXE/WD
http://www.newegg.com/Product/Product.as...6835608025
The Fan is too big and hits the memory slots. It fits height wise, but not width.
![Sad Sad](https://forums.dolphin-emu.org/images/smilies/sad.gif)
#2. Do not use a USB DVD Drive to install windows. You can see from one of my overhead pictures I had to put a SATA drive on there to install windows. What happens with the USB drive is that it doesn't properly detect the AHCI ports on the MB even when you manually select the driver to install on launch. It took me a while to figure that out since that kind of glitch doesn't make much sense. Then again, I don't suspect many people think about only using a USB Disk drive. I didn't use sata originally because I didn't plan on keeping the drive on there permanently.
#3. There is a power switch on the power supply that is hidden in the chasis and on shipping the default is OFF. The switch isn't on the outside of the case, which kind of sucks, but what can you do. I had a small "eep" moment when I plugged it in and nothing happened. The switch is even slightly hidden by the power cable that gets routed around.
#4. No IR on this MB. I ordered a simple IR receiver to put it into my harmony system. The USB ports can stay on when the computer is off, so the IR receiver should allow the system to be turned on via remote.
That's all the notes I have for now. I will have a few more via video when I demo the system.