Bluetooth requirements for wii controls ?

Silithas · 06-13-2013, 08:14 PM #1

Hey, i am today going to buy myself a wii to catch up to some good old wii games, but im also going to use the wii's sensor and controllers for dolphin.

So here is my question:

Will this bluetooth 2.1 dongle work with the controllers? or does it have to be a normal size and not a nano dongle?

http://www.clasohlson.com/no/Bluetooth-adapter/Pr383355000

**admin89** · (This post was last modified: 06-13-2013, 08:55 PM by admin89.)

mini dongle will not work well with multi-wiimotes due to poor bandwidth , you have to sacrifice performance for the super small form factor
If you only use 1 wiimote , that mini dongle may work fine
Though ... If I was you , I would get this one instead
http://www.clasohlson.com/no/Bluetooth-adapter/Pr387000000
There's no guarantee a certain BT dongle will work with your wiimote , you have to rely on your luck

**LordVador** · 06-13-2013, 08:55 PM #3

(06-13-2013, 08:14 PM)Silithas Wrote: Will this bluetooth 2.1 dongle work with the controllers? or does it have to be a normal size and not a nano dongle?

http://www.clasohlson.com/no/Bluetooth-adapter/Pr383355000

Nano dongles work just fine. Mine is a nano dongle too.

This dongle should work

Silithas · 06-13-2013, 09:20 PM #4

Ok good

cause i am the only one who is boing to play. So the nano should be good enough for one user Smile

Silithas · (This post was last modified: 06-14-2013, 01:19 AM by Silithas.)

Ok, i do now got my wii set up and connected the bluetooth dongle, but the problem is that no matter how much i try the bluetooth thingy on my pc just wont discover the control! Sad

What is wrong here?

Or the wiimote has kinda been found but it installs itself every time i try to pair it up with dolphin... why wont it pair up?

**LordVador** · 06-14-2013, 01:24 AM #6

Try Toshiba stack (I suppose you're using Microsoft stack)

Silithas · 06-14-2013, 02:07 AM #7

(06-14-2013, 01:24 AM)LordVador Wrote: Try Toshiba stack (I suppose you're using Microsoft stack)

Thanks

Downloaded the 64bit driver from tpb and now it responded on the second^^

But one other question, how can i calibrate the sensor location? cause i have to hold the controller 20 degree to the left to get the rectile in the middle :S same with up (i keep my wii on to hold the sensor on)

**admin89** · 06-14-2013, 02:25 AM #8

Quote:keep my wii on to hold the sensor on

You don't have to do that
Just modify your sensor bar . It's not that hard
http://forums.dolphin-emu.org/Thread-how-to-convert-nintendo-wii-sensor-bar-to-usb-sensor-bar?page=2

**LordVador** · (This post was last modified: 06-14-2013, 02:26 AM by LordVador.)

Did you perfectly align your sensor bar with your screen? If so try to play farther from your screen, or closer