Bluetooth Passthrough will not Pair my WiiMotes

[chriskant]

Hi together,

I bought a Kinivo BTD - 400 Bluetooth Dongle - which is mentioned in the Dongle List
   

I did everything that was mentioned in an other post:
   

except the Point 10 because it is no longer needed.

Then I set the options to Bluetooth Passthrough and start a Game (WiiSports). Game starts, now I want to pair my Wiimotes but it will not happen. When I try to start another game (New Super Mario Bros or Mario Kart Wii) there is only a black screen and nothing else will happen).

I have one -wC62 (MotionPlus Zelda Edition) and one -45 (original WiiMote from 2006 Release Day).

I pressed Sync in the Controls Menu, and then the Red Sync Button on the Motes and other way around as well. The on-screen menu says "scanning for wiimotes" but nothin else will happen.

Can someone give me an advice or at least a hint?

bests
Chris

[leolam]

Sounds like you are doing everything correctly, but the adapter is refusing to work… Have you tried a clean Dolphin profile? If it still won't work, it looks like you may need to get another adapter (and update the wiki to not recommend it any longer).

[chriskant]

also tried a full clean master from this morning. no chance. even unplugged my MayFlash Dolphin Bar

[Lurkon01]

So I also have the Knivo BTD-400, have it working perfectly apart from it doesn't remember pairings.

An extra step that you have to do, that is listed on the wiki page but not in your screenshot is:

In 5.0-2352 and newer
Download and install the latest x64 usbdk driver.

Because of an issue with usbdk/Windows, Zadig must also be used currently. Refer to the the above instructions.

Link Here: https://github.com/daynix/UsbDk/releases

I hope this helps, make sure to restart your pc after installing the driver as well.

[Lurkon01]

Now after posting this the wiki has got changed and it's meant to be optional.

(the usbdk change was made optional)

[chriskant]

Now after posting this the wiki has got changed and it's meant to be optional.

thank you for this help. I tried it again but still can't find them.

I installed the usbdk then restart system. then Zadig and again a restart... nothing. or do you mean first Sadie then the usbdk?

[Lurkon01]

Are you just getting a black screen when you load games? Because this means dolphin isn't finding the adapter properly. Double check your config file with VID and PID numbers, as thats the only other thing I can personally think of.

[chriskant]

I got a gaming screen... doesn't matter which game ... I have to press a button (for example A+B). while this screen is there I tried different ways to synchronized only one wiimote. first red button at wiimote and then pressing sychronized in dolphin and after that other way around. nothing happen.