Bluetooth dont detect wiimote motionplus

GatoXman · 09-01-2013, 01:14 AM #1

I have an old wiimote to synchronize with Onboard Bluetooth controlled by Windows and works perfectly. But I bought a new Wiimote with integrated MotionPlus and I can not detect it. I tried pressing the red button or by pressing 1 +2 without success. Wiimote lights come on as normal but no computer detects it. The version of the control on the side is: [color=#0000ff]ACN[/color][color=#0000ff] 060 566 083[/color] / FCC ID: [color=#0000ff]POO-WC62[/color] / IC: [color=#0000ff]4250A-WC62[/color]. At the bottom is: [color=#999900]RVL-036.[/color] And inside: [color=#ff0000]RVL (M) -1 RVL[/color][color=#ff0000]-003[/color].

I searched a lot on the internet and some say it is the version of wiimote. Is there a problem with this version?
Thanks for helping

**LordVador** · 09-01-2013, 01:38 AM #2

If your Wiimote is recent it's likely to be a "TR" model. This kind of model tends to work painfully with Dolphin. Try Toshiba BT stack instead of Microsoft one to solve this

GatoXman · 09-01-2013, 02:51 AM #3

My bluetooth adapter is internal motherboard and not detected Toshiba's software. But the problem is not keeping the connection. My problem is that it does not detect it, as if the wiimote was off. I will try to test it with the Wii console that has a friend if wiimote failure. Thanks for the reply

**LordVador** · 09-01-2013, 03:19 AM #4

(09-01-2013, 02:51 AM)GatoXman Wrote: My bluetooth adapter is internal motherboard

You might wanna try an external BT adapter (dongle). built-in ones usually suck

GatoXman · 09-21-2013, 12:46 PM #5

Hello again. I tried the Wiimote playing on the Wii original and works perfectly Smile

. But continued without detection from the computer Huh

. I have used two external USB adapters and three internal adapters. I have also tried the BlueSoleil, the ToshibaStack, the default Windows driver, the driver from the device manufacturer... None detected this version of the Wiimote. Any suggestions? thanks

***MayImilae*** · 09-22-2013, 12:10 AM #6

Have you read the guide? - https://wiki.dolphin-emu.org/index.php?title=Wii_Remote_Plus_(RVL-CNT-01-TR)_Connection_Guide

**mbc07** · 09-22-2013, 02:32 AM #7

Try the "Forcing Toshiba drivers" section from the guide MaJoR linked you to

GatoXman · 09-22-2013, 04:33 AM #8

Thanks for your answers. But maybe my English is not adequate or not express myself well, sorry Undecided

. I have no problems with my adapters bluethoot to detect my old wiimote, mobile, notebook, printer, etc. .. I have no problems with ToshibaStack, I can use it with my old wiimote successfully.
My problem is that this damn new wiimoteplus not visible in search bluethoot devices. It's like the wiimote was off. It only works with the original Wii. What has happened to anyone else?

***MayImilae*** · (This post was last modified: 09-22-2013, 10:11 AM by MayImilae.)

If it's a -TR remote and you have the Toshiba Stack working, it will be discoverable. Considering almost no one has "no problems" with the Toshiba Stack... I kind of don't believe you. What happened when you attempted to install the Toshiba Stack?

And are you sure it isn't a 3rd party wiimote?

GatoXman · (This post was last modified: 09-23-2013, 07:44 AM by GatoXman.)

(09-22-2013, 10:08 AM)MaJoR Wrote: Considering almost no one has "no problems" with the Toshiba Stack... I kind of don't believe you.

Apparently I'm not the only one who gives the same problem and in this forum in the last days..
https://forums.dolphin-emu.org/Thread-unofficial-wiimote

Any useful answer? thanks