Black screen on boot after sleep/restart with Intel 8260

[Lurka]

Hello,
I have a Wiimote Plus compatible controller, that seems to work only with passthrough mode.

Machine:
Lenovo Thinkpad T470
Windows 10 Pro x64
Intel Dual Band Wireless-AC 8260 (VID 8087 - PID 0A2B)

The bluetooth adapter should be as good as the Intel 7260, but it cannot detect my controller at all.
I also tested the Toshiba stack on a Windows 7 machine, but it could not detect the controller, as well.

The controller works only with passthrough mode, but there is a little issue: after system restart or sleep, it runs into the "Black screen on boot" described in the wiki.

I have to uninstall and reinstall the libusbk driver every time I want to play with the controller. It's just a matter of seconds, but my greatest concern is that something could eventually break in the system configuration.

Do you have any suggestions to try and fix that?
Maybe an external bluetooth dongle could be the solution?

Thank you and regards,
Lurka

[ExtremeDude2]

Rather than reinstalling every time you could probably disable and re-enable it in windows, other than that I'm not sure if there is a fix.

[Lurka]

(04-25-2018, 10:35 PM)ExtremeDude2 Wrote: Rather than reinstalling every time you could probably disable and re-enable it in windows, other than that I'm not sure if there is a fix.

That's the first thing I tried, but no result.

Regards,
Luke

[mbc07]

Revert to the default Windows drivers, then try UsbDk. It might not work for everyone but when it works properly, it's the best approach. Basically Dolphin takes control of the BT Adapter automatically when you boot a game with BT Passthrough enabled and automatically gives the control back to the MS BT Stack when done (e.g. when you close Dolphin)...

[Lurka]

(04-26-2018, 06:22 PM)mbc07 Wrote: Revert to the default Windows drivers, then try UsbDk. It might not work for everyone but when it works properly, it's the best approach. Basically Dolphin takes control of the BT Adapter automatically when you boot a game with BT Passthrough enabled and automatically gives the control back to the MS BT Stack when done (e.g. when you close Dolphin)...

IT WORKS!! IT WORKS!! 

UsbDk works across sleep and restart, and doesn't even need to have bluetooth enabled in Windows.
Thank you again to all developers and members for your hard work and your availability in supporting this wonderful emulator!

Best regards,
Lurka