(01-01-2012, 07:52 AM)Sadge Wrote: I can confirm xoppa's modified code and Installation of The Toshiba Bluetooth Stack WORKS with the Wiimote Plus (TR suffix) on my comp running XP !!! I am using a Logitech Bluetooth dongle which would previously connect with the wiimote but it would not be recognised in Dolphin (using the Microsoft Bluetooth Stack).Xoppa's instructions are spread across a few posts in the code forum so I thought it might save people a lot of time and head scratchin if I consolidated it into one post.
These instructions and files are for 32 bit machines ONLY ! If you are running 64bit you'll need Xoppa's 64bit code mod for Dolphin.....
Files required:
Xoppa's Code Mod for Dolphin -
http://www.xoppa.com/download/dolphin-tr-x86.zip
The Toshiba Bluetooth Stack Drivers - http://www.sitecom.com/download/4791/toshiba_8.htm
First off download Xoppa's code mod and extract it. Copy the files into your existing Dolphin
folder overwriting the existing files.....
Next, download and extract the Toshiba Bluetooth Stack. Run "Setup.exe" from the x32 folder to install.... insert your Bluetooth dongle if asked to do so......Restart computer when asked..... remove your dongle before PC reboots.
Once your PC is started you can insert your dongle....
To use the TR Wiimote follow these instructions:
1. Right Click the bluetooth icon in the system tray and choose "Add new connection", press the 1 and 2 buttons together on the Wiimote when the "searching" window appears.If the Wiimote is not detected, select "Express Mode" in the next window and click next, quickly pressing 1 and 2 together on the wiimote. The wiimote should now be listed as "Nintendo RVL-CNT-01-TR".
2. Right click the "Nintendo RVL-CNT-01-TR" icon in the bluetooth settings window and select "connect"............. a dialog pops up.
3. Press the A button on the wiimote then click OK on the dialog.
4. The wiimote should be connected now, but no LEDs. Check this by pressing the A button, no LEDs should blink. If LEDs start to blink restart from 2.
5. Open Dolphin, (make sure you have copied Xoppa's modded files into its directory as described earlier), click on the "Wiimote" Icon in Dolphin and press refresh......
6. One LED on the wiimote should light up indicating it's number and the wiimote rumbles. If not hit refresh again or restart from 2.
The TR Wiimote should now be fully functional.
Many thanks to Xoppa for his hard work.... this has had my head done in for two days !!! My wiimote TR now works perfectly in Dolphin, but maybe I'm just one of the lucky ones?? ..... I've only tested it with New Super Mario Bros so far but I'm sure Xoppa has cracked this one for us ! I'm using the latest build of Dolphin as well FYI.
Works fine! Thanks. Here for 64 Bit http://www.xoppa.com/download/dolphin-tr-x64.zip