I think we need a tutorial so i decided to make one
Prepare :
_ 1 Original Wii Sensor Bar from Nintendo (Made in Korea,China,Japan)
_ 1 USB Cable
_ 1 Battery 1.5v
_ 1 Battery container :
![[Image: 8481201_sfogtf101206050458.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_sfogtf101206050458.jpg)
Here we go :
At First , Cut the Sensor Bar cable into 2 wire : Red and Yellow
![[Image: 8481201_knzyig101206044851.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_knzyig101206044851.jpg)
Then burn 2 wire a bit to conduct electricity :
![[Image: 8481201_haoybr101206044901.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_haoybr101206044901.jpg)
Cut the USB cable,you'll see many wire : Red , Black , White, Green and the Silver outside.Only need "Red" and "Silver" one, cut off the other left
![[Image: 8481201_lknzxg101206044835.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_lknzxg101206044835.jpg)
Twist the yellow wire (sensor bar) with the Silver wire (USB) :
![[Image: 8481201_qfrmrw101206044938.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_qfrmrw101206044938.jpg)
Now connect USB cable to PC :
![[Image: 8481201_bvqnbj101206045002.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_bvqnbj101206045002.jpg)
Add a battery 1.5v .Tada :
![[Image: 8481201_kmdehi101206044950.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_kmdehi101206044950.jpg)
Note :
SensorBar's LED lights only is visible through a camera,you can't see it with your eyes
Prepare :
_ 1 Original Wii Sensor Bar from Nintendo (Made in Korea,China,Japan)
_ 1 USB Cable
_ 1 Battery 1.5v
_ 1 Battery container :
![[Image: 8481201_sfogtf101206050458.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_sfogtf101206050458.jpg)
Here we go :
At First , Cut the Sensor Bar cable into 2 wire : Red and Yellow
![[Image: 8481201_knzyig101206044851.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_knzyig101206044851.jpg)
Then burn 2 wire a bit to conduct electricity :
![[Image: 8481201_haoybr101206044901.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_haoybr101206044901.jpg)
Cut the USB cable,you'll see many wire : Red , Black , White, Green and the Silver outside.Only need "Red" and "Silver" one, cut off the other left
![[Image: 8481201_lknzxg101206044835.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_lknzxg101206044835.jpg)
Twist the yellow wire (sensor bar) with the Silver wire (USB) :
![[Image: 8481201_qfrmrw101206044938.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_qfrmrw101206044938.jpg)
Now connect USB cable to PC :
![[Image: 8481201_bvqnbj101206045002.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_bvqnbj101206045002.jpg)
Add a battery 1.5v .Tada :
![[Image: 8481201_kmdehi101206044950.jpg]](http://image.blog.bitcomet.com/postpic/20101206/8481201_kmdehi101206044950.jpg)
Note :
SensorBar's LED lights only is visible through a camera,you can't see it with your eyes
Laptop:
Mini PC ::