(09-02-2013, 03:04 PM)admin89 Wrote: 6850 has 128GB/s memory bandwidth > 7790 (96 GB/s)That makes sense. Do you know what NaturalViolence was talking about with the AMD overscanning?
Higher memory bandwidth = Higher resolution in Dolphin
Quote:A GTX 650 TI boost will certainly get the job done.I second this
GTX 650 Ti Boost has 144 GB/s memory bandwidth , AMD 7850 is also good stuff (153.6 GB/s)
Upgrading my HTPC (GPU choice)
|
09-02-2013, 03:35 PM
09-02-2013, 06:45 PM
(09-02-2013, 02:43 PM)0118999 Wrote: That said, I didn't start this thread to talk about the PSU choices. Where I'm lacking knowledge is with Dolphin and GPU performance.Well, we didn't know what your specs were in the first place and how you use it, but you seem to have done your research. I asked what your PSU was to help you, people generally underestimate the need for a quality PSU and purchase cheap PSU's that output too little Watts sometimes. They usually buy too much though. The 650Ti Boost would be a better choice and should be able to handle that 2xIR + 4SSAA in most games except the graphical intensive ones. (09-02-2013, 06:45 PM)Garteal Wrote:That's understandable. I threw my power consumption considerations out there so people wouldn't recommend something like a 7970 or a GTX 690.(09-02-2013, 02:43 PM)0118999 Wrote: That said, I didn't start this thread to talk about the PSU choices. Where I'm lacking knowledge is with Dolphin and GPU performance.Well, we didn't know what your specs were in the first place and how you use it, but you seem to have done your research. So if I want to run 2xIR + 4SSAA, I need at least a 650ti Boost (or a 7850, I guess). Earlier in this thread, admin89 said that 4xIR is the same as 2xIR + 4SSAA. If that's true and 4xIR requires less GPU power, wouldn't that be a more optimal performance goal? I'm not set on 2xIR + 4SSAA as my minimum performance goal because I don't know enough about Dolphin to do so. I'm still trying to figure out what I should be shooting for. 0118999 Wrote:I'm not set on 2xIR + 4SSAA as my minimum performance goal because I don't know enough about Dolphin to do so. I'm still trying to figure out what I should be shooting for. It's all about the image quality you're after. For most people, 4x IR does the trick. Perhaps one of us could give you some screenshots at various settings so you could determine what looks best to you? If you have any games in mind specifically, just throw them out. (09-03-2013, 12:53 AM)Shonumi Wrote:The games that I'll be running are:' Wrote:I'm not set on 2xIR + 4SSAA as my minimum performance goal because I don't know enough about Dolphin to do so. I'm still trying to figure out what I should be shooting for. (what I run right now) Windwaker Twilight Princess Mario Kart Double Dash NHL Hitz 2003 (what I'll probably/hopefully be running after the upgrade) Mario Galaxy Skyward Sword Mario Kart Wii 09-04-2013, 09:37 AM
0118999 Wrote:admin89: I didn't know that 4xIR and 2xIR+4xSSAA were the same thing. Is the processing actually identical? Will those processes produce identical images? They're not the same thing. They just have roughly the same performance hit since they both cause everything to be rendered at 16 times the native resolution. SSAA uses a different scaling filter. It's generally better in terms of image quality. 0118999 Wrote:NaturalViolence: What is the AMD overscanning issue you're referring to? I haven't owned an Nvidia card in almost 10 years, so I don't have any personal experience to compare the two brands. In general AMD GPUs are more likely to have issues with using an HDTV. It's really a luck of the draw type of thing that depends on your gpu model, driver version, and HDTV model. The most common of these is an overscanning issue that causes black bars around the image (the image doesn't fill the entire screen). admin89 Wrote:Higher memory bandwidth = Higher resolution in Dolphin That's not entirely true. It has a larger effect on performance than it generally does in PC games but it's certainly not the only factor that effects performance.
"Normally if given a choice between doing something and nothing, I’d choose to do nothing. But I would do something if it helps someone else do nothing. I’d work all night if it meant nothing got done."
-Ron Swanson "I shall be a good politician, even if it kills me. Or if it kills anyone else for that matter. " -Mark Antony (09-04-2013, 09:37 AM)NaturalViolence Wrote:Thanks for the response.0118999 Wrote:admin89: I didn't know that 4xIR and 2xIR+4xSSAA were the same thing. Is the processing actually identical? Will those processes produce identical images? Regarding what you describe as the overscanning issue, I think I know what you're talking about. It shows up when you use the HDMI output. There's actually a way to adjust that in the Catalyst control center. If you type "overscan" into the search bar, it'll take you to a screen called "Scaling Options (Digital Flat-Panel)". The default is something like 5-10% (I don't remember, exactly). Just set it to 0% and you get rid of those black bars. Why AMD chose that as the default, I don't know. I found it annoying, too. But a google search brought up the solution. |
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)