Im playing brawl and just pushing the arrows will make the character run instead of walk. I wish there was an option to double tap but yea is there any way i can decrease the sensitivity so that i can walk instead of sprint? im using the latest version of dolphin
decreasing the sensitivity of the analog stick (arrows)
|
10-31-2011, 06:02 AM
The modifier setting, when pressed in addition to the joystick, makes the joystick only move halfway.
Main Laptop:
Dell XPS 17 i7 2720QM @ 2.2GHz 8GB DDR3 RAM Nvidia GeForce GT 555M Windows 7 64-bit 11-15-2011, 07:14 AM
(10-31-2011, 06:02 AM)HawaiianPunch Wrote: The modifier setting, when pressed in addition to the joystick, makes the joystick only move halfway. I am having the same problem with Wind Waker using the mirror shield. Using the modifier only decreases the range slightly -- not nearly 1/2. My analog controller usis the non-numberpad arrow keys Thanks for any help 04-25-2012, 08:46 AM
I am having this same problem trying to aim arrows at wind waker too. Isn't there a range option like old dolphin used to have?
Operating System: Windows 7 Home Premium 64-bit
Processor/CPU: AMD FX-4100 Quad-Core 3.6GHz Video Card/GPU: Nvidia Geforce GTX 560 1GB DDR5 Memory/RAM: 8gb DDR3 Dolphin Revision Currently Using: 3.0-589-dirty 64-bit 04-26-2012, 05:00 AM
(04-25-2012, 08:46 AM)Stip Wrote: I am having this same problem trying to aim arrows at wind waker too. Isn't there a range option like old dolphin used to have? You need to use a joystick. I had the same problem for a while, then I started using a DS3 and it works great.
Main Laptop:
Dell XPS 17 i7 2720QM @ 2.2GHz 8GB DDR3 RAM Nvidia GeForce GT 555M Windows 7 64-bit 09-28-2012, 11:31 PM
I'm not sure if anyone is still looking for a solution to this, but at least for the "Wind Waker mirror shield"-problem using TAS-Input works great. do the following:
1. Make sure there are no more enemies in your vicinity ( ) 2. Look in the direction you want to reflect the light and get your sword out (so you will use the shield when pressing the "R"-button) 3. Go to the Dolphin-window, select the "Emulation"-chart and click "TAS Input" Now please look at the picture I attached 4. Put the right "Shoulder Buttons"-slider to its maximum (Link will take out his shield) 5. Use the vertical "Main Stick"-slider to adjust the shield deflection to the required state you don't have to set the values back to their original value, just close the TAS Input window after you are done this method of course won't help with brawl, but in situations where you have to stand still and aim carefully (like when deflecting the light with your mirror shield) |
« Next Oldest | Next Newest »
|
Users browsing this thread: 1 Guest(s)